Supreme Painters, Inc. is a leader in the Epoxy Coating Industry

Broom Finish Overlay
A Cost Effective Repair for Concrete
Broom Finish Overlay

Most city sidewalks and commercial strip malls have a broom finish because it is so cost effective. However, much of this concrete is stained, cracked, weathered, or in general just plain unsightly. Supreme Painters offers a VERY cost effect way of resurfacing these walkways, driveways, parking lots, or pedestrian bridges. For new concrete surfaces that have been damaged, it is an economical way to repair the surface and make it look new again. Our broom finish polymer concrete overlay gives you the look of new broom finished concrete at a 1/3 to 1/2 the cost of replacement, not to mention, without the hassles, jackhammer noise, or extended dry time of freshly poured concrete. Integral color can be added for a completely new look, or it can be applied in a natural concrete color. We can add decorative borders as well. Our broom finish also helps protect your concrete from damaging freeze-thaw cycles as well as salt damage. We apply a sealer for extra resistance to dirt, oil, tire marks, and other contaminants.

Garage Floors Epoxy Floor Systems
A Cost Effective Repair for Concrete

Garages are not just for parking cars or storage anymore. Many homeowners are transforming them into well-organized workshops, game rooms, or fitness areas. Our Epoxy Floor Systems can beautify garage floors as well as other concrete surfaces by providing a luxurious look like that of granite or terrazzo at a fraction of the cost. A seamless epoxy floor in your basement can eliminate potential mold and mildew problems associated with carpet, while also offering design options not available with any other flooring type.

Broom Finish Overlay
Our Epoxy Floor Coating Systems have been developed over many years to provide the best protection against moisture vapor transmission problems, hot tire lifting, and yellowing from the ultra violet rays of the sun. Don't be deceived. This isn't like your typical paper thin box store system that is bound to fail! Like all our products, proper surface preparation and high quality products will produce great results. Choose from one of our standard 12 color blends with optional flakes, 20 reflecting metallic colors, or create a custom color to match any decor. For floors that are chemical resistant, stain resistant, durable, long lasting, and easy to clean, our Epoxy Floor Systems can't be beat!

Stamped Overlay
A Decorative Solution for Existing Surfaces One of the most unique of our products is our Stamped Overlay. It can be applied over your existing concrete, then stamped in a variety of textures, designs and patterns using custom made stamps. With this product, we can achieve the same beauty, elegance, and natural appearance of traditional stamped concrete without the need for removal and replacement.

The unique composition and installation process of our Stamped Overlay allows it to be installed indoors over sound wood subfloors where it was previously impossible to install stamped concrete. Now it is a viable, innovative alternative to conventional flooring products, that is both extremely durable and cost effective. Stamped concrete overlays are typically used for driveways, pool decks, patios, walkways, restaurants, retail stores, shopping centers, courtyards, entrances and exits, showrooms and theme parks.

Painters Need Not Apply. Industrial Flooring Professionals at Work!
Epoxy was first used in the early 1950s for concrete restoration. Over the last couple of decades, epoxy painted floors have hit the mainstream consciousness and have become a preferred coating for residential garages. Home DIYers and commercial painters have begun applying what is colloquially known as epoxy paint.

There is a vast difference between epoxy paint and a true industrial-strength epoxy coating, however.

The main difference is in the quality and durability of the materials as well as the skill required to successfully install the product. Common household epoxy paint is good only for light-duty applications and was never intended for industrial use. It is manufactured with a long pot life for easier application. Products like this may perform beautifully for light-traffic, residential use but are not strong or durable enough for industrial use.

Epoxy Floor Coatings
The true industrial solution is a floor coating that is specifically designed for your use. Whether you are processing food or chemicals, manufacturing electronics or pharmaceuticals, or need a floor coating for an aircraft hangar, there is a wide range of specialty epoxy coatings for your needs. Your professional floor coating installer can design your epoxy floor to be skid resistant, hygienic, electrostatic dissipative and conductive, and much more, depending upon your requirements. However, epoxy floor coatings are much more difficult to install than home DIY kits and require a professional coatings installer with experience in the industry. Most industrial coatings products are 100% solids and are a multi-component resin system with a short pot life. This means that they require a skilled hand during the floor preparation, mixing and application process. The end result is a seamless floor that performs beautifully and is hygienic, durable and easy to clean. What is the Difference Between Floor Paint and Floor Coating?
  • Epoxy paint is essentially latex paint with a small amount of added epoxy for increased durability. This type of product is best left for DIY home garage projects and is never an appropriate choice in industrial settings.
  • Epoxy floor coating is a much more technical process that requires the expertise of a flooring professional to properly install. The exact materials used vary depending on the type of flooring system required, but every floor system installation requires careful planning to ensure the essential performance characteristics are achieved with the finished floor. Floor coating systems require the proper preparation of the underlying concrete and subsequent layers to ensure the products bond correctly and the coating is successful.
Measurable Benefits, Impenetrable Protection
Floor coating systems are used in an array of industry facilities including chemical processing, food processing, electronics, aviation, pharmaceuticals, and warehousing. These systems protect concrete floors as well as products in the facility and provide a safe working environment for staff. They are seamless, easy to clean and non-toxic. High-gloss flooring options can even save you money on your electric bill by reflecting light so that fewer indoor lights are needed. Performance Characteristics of Industrial Floor Coatings:
  • Abrasion resistant
  • Impact resistant
  • Chip / flake resistant
  • Corrosion resistant
  • Anti-slip (safety)
  • Antibacterial
  • Antimicrobial
  • Antistatic
  • Hygienic
  • Long-lasting
Types of Floor Coating Systems
The materials used for industrial facility flooring vary depending on specific needs but can largely be divided into the following categories:
  1. Epoxy - Epoxy is a resin comprised of 1-part epoxide resin and 1-part polyamine hardener. In the application process the epoxy is left to cure for a minimum of 24 hours. When cured, it produces polymer structures that give the substance great strength and durability. This type of floor coating is non-porous and is used in high impact facilities where optimum durability is the top priority. Highly resistant to chemical spills and abrasion, these systems are often used with decorative chips or colored sands. We can achieve an infinite array of color schemes or patterns with this material.
  2. Epoxy & Urethane - Epoxy and urethane floors have an added top layer of urethane that acts as a seal and provides a seamless surface that is moisture and heat resistant. Epoxy & urethane floor systems are commonly found in the food and beverage industry.
  3. Acrylic (MMA) - MMA is a dual system polymer that is not as hard or durable as epoxy but is a formidable option for commercial flooring. MMA has a low glare satin finish and is resistant to weak acids, alkalis, solvents and scratches. It is also highly flammable and odorous, so special ventilation and installation procedures must be implemented.
  4. Polyurea - Polyurea is an organic polymer that is the result of a reaction from mixing an isocyanate and resin blend component. Polyurea has a rubber-like feel, making it not as hard as epoxy but still extremely durable. Polyurea flooring has a high-gloss finish, is highly stain and chemical resistant, and has a high heat tolerance.
Making the Right Choice
Surface Technology is the nationwide leader in providing flooring solutions for industrial customers. We work closely with you to determine the needs of your facility and create a flooring solution that is tailored to your company's needs. We are fully aware of the regulatory and industrial standards in place across the USA and ensure full compliance with those standards. Our work is noted for its quality and durability, and we are respected for our unique ability to respond and install industrial floors on short notice. Our teams of trained and well-equipped installers are available to work during holiday periods when facilities are in a planned shutdown period.
When it is time to think about a new flooring system for your industrial facility, call Surface Technology. We are a trusted and respected contractor that specializes in the custom design and installation of industrial floors for industrial facilities. We guarantee that we will provide the right floor for your needs.